Difference between revisions of "TUFLOW Message 1331"

From Tuflow
Jump to navigation Jump to search
Line 11: Line 11:
 
V - Variable Geometry<br>
 
V - Variable Geometry<br>
 
W - Weir over the top<br>
 
W - Weir over the top<br>
 +
Flags can be added after channel type, for example to set a culvert as uni-directional (such a a tide gated culvert) a "CU" type channel is assigned.
 
For a detailed description of channel flags see Table 4.13 1D Channel and Node Types of the TUFLOW manual (2010 version).
 
For a detailed description of channel flags see Table 4.13 1D Channel and Node Types of the TUFLOW manual (2010 version).
 
|suggestions=Remove invalid flags / specify correct flag.
 
|suggestions=Remove invalid flags / specify correct flag.

Revision as of 15:02, 3 February 2011

TUFLOW Message
ERROR 1331 - Unrecognised flag for channel

Alternate Message
NA

Message Type
ERROR

Description
Flag for channel is unrecognised or invalid for channel type. Vaild flags are:
A - Adjust Stucture Losses
D - Downstream Controlled
F - Fix Sturucture Losses
N - Non-inertial Channel
U - Uni-direction
V - Variable Geometry
W - Weir over the top
Flags can be added after channel type, for example to set a culvert as uni-directional (such a a tide gated culvert) a "CU" type channel is assigned. For a detailed description of channel flags see Table 4.13 1D Channel and Node Types of the TUFLOW manual (2010 version).

Suggestions
Remove invalid flags / specify correct flag.


Up
Go-up.png 1xxx Messages