Difference between revisions of "TUFLOW Message 1381"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[WARNING]] | |type=[[WARNING]] | ||
| − | |message_desc=The default manhole coefficient used for the Engelhund approach is greater than 1. For C manholes the <tt>Manhole Default C Exit Coefficient == </tt> is applied, and for R manholes <tt>Manhole Default R Exit Coefficient == </tt>is used. The defaults for C and R exit coefficients are 0.25 and 0.5 respectively. | + | |message_desc=The default manhole coefficient used for the Engelhund approach is greater than 1. For C manholes the <tt><font color="blue">Manhole Default C Exit Coefficient </font><font color="red">== </font></tt> is applied, and for R manholes <tt><font color="blue">Manhole Default R Exit Coefficient </font><font color="red">== </font></tt>is used. The defaults for C and R exit coefficients are 0.25 and 0.5 respectively. |
|suggestions=Default is outside normal ranges, review data and modify is appropriate. | |suggestions=Default is outside normal ranges, review data and modify is appropriate. | ||
|discussion_page=* [[Talk:TUFLOW Message 1381|Discuss Message 1381]] | |discussion_page=* [[Talk:TUFLOW Message 1381|Discuss Message 1381]] | ||
Revision as of 16:57, 23 June 2022
TUFLOW Message
WARNING 1381 - Manhole Default Exit Coefficient is greater than 1.
Alternate Message
NA
Message Type
WARNING
Description
The default manhole coefficient used for the Engelhund approach is greater than 1. For C manholes the Manhole Default C Exit Coefficient == is applied, and for R manholes Manhole Default R Exit Coefficient == is used. The defaults for C and R exit coefficients are 0.25 and 0.5 respectively.
Suggestions
Default is outside normal ranges, review data and modify is appropriate.
| Up |
|---|
 1xxx Messages
|