Difference between revisions of "TUFLOW Message 1421"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=CHECK 1421 - Top level of bridge cross-section data differs to that in loss vs height table for channel <channel id><br> Top level in HW table...")
 
 
(2 intermediate revisions by 2 users not shown)
Line 7: Line 7:
 
|message_desc=The highest elevation in the bridge cross-section data (the soffit) is different than the highest level in the bridge loss coefficient data.
 
|message_desc=The highest elevation in the bridge cross-section data (the soffit) is different than the highest level in the bridge loss coefficient data.
 
|suggestions=Review the input data to ensure that the loss table and cross-section data is being input correctly.
 
|suggestions=Review the input data to ensure that the loss table and cross-section data is being input correctly.
|discussion_page=* [[Talk:TUFLOW Message 1421|Discuss Message 1421]]
+
 
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_1402|Message 1402]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1500|Message 1500]]
 
 
}}
 
}}

Latest revision as of 10:41, 23 December 2022

TUFLOW Message
CHECK 1421 - Top level of bridge cross-section data differs to that in loss vs height table for channel <channel id>
Top level in HW table = <value>
Top level in LC table = <value>

Alternate Message
NA

Message Type
CHECK

Description
The highest elevation in the bridge cross-section data (the soffit) is different than the highest level in the bridge loss coefficient data.

Suggestions
Review the input data to ensure that the loss table and cross-section data is being input correctly.


Up
Go-up.png 1xxx Messages