Difference between revisions of "TUFLOW Message 1422"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for B bridge channel <channel id> |alt_msg=ERROR 1422...")
 
Line 5: Line 5:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge).  Please refer to the TUFLOW manual for more details on modelling bridges.
 
|message_desc=No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge).  Please refer to the TUFLOW manual for more details on modelling bridges.
|suggestions=Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute.
+
|suggestions=Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute. <br>
 +
Due to the potential for a divide by zero, a zero loss value can not be specified on the 1d_nwk layer if no LC table has been linked.  A minimum loss value of 0.01 for B bridges or 0.001 for BB bridges will need to be specified in the 1d_nwk Form_Loss attribute.
 
|discussion_page=* [[Talk:TUFLOW Message 1422|Discuss Message 1422]]
 
|discussion_page=* [[Talk:TUFLOW Message 1422|Discuss Message 1422]]
 
|link3=''
 
|link3=''

Revision as of 10:16, 2 February 2017

TUFLOW Message
ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for B bridge channel <channel id>

Alternate Message
ERROR 1422 - No pier losses via LC table or 1d_nwk Form_Loss attribute specified for BB bridge channel <channel id>
ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for BB bridge channel <channel id>

Message Type
ERROR

Description
No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge). Please refer to the TUFLOW manual for more details on modelling bridges.

Suggestions
Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute.
Due to the potential for a divide by zero, a zero loss value can not be specified on the 1d_nwk layer if no LC table has been linked. A minimum loss value of 0.01 for B bridges or 0.001 for BB bridges will need to be specified in the 1d_nwk Form_Loss attribute.


Up
Go-up.png 1xxx Messages