Difference between revisions of "TUFLOW Message 1422"
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for B bridge channel <channel id> |alt_msg=ERROR 1422...") |
Melissa1987 (talk | contribs) |
||
| (4 intermediate revisions by 3 users not shown) | |||
| Line 5: | Line 5: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge). Please refer to the TUFLOW manual for more details on modelling bridges. | |message_desc=No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge). Please refer to the TUFLOW manual for more details on modelling bridges. | ||
| − | |suggestions=Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute. | + | |suggestions=Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute. <br> |
| − | + | Due to the potential for a divide by zero, a zero loss value can not be specified on the 1d_nwk layer if no LC table has been linked. A minimum loss value of 0.01 for B bridges or 0.001 for BB bridges will need to be specified in the 1d_nwk Form_Loss attribute. | |
| − | + | ||
| − | + | ||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 10:41, 23 December 2022
TUFLOW Message
ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for B bridge channel <channel id>
Alternate Message
ERROR 1422 - No pier losses via LC table or 1d_nwk Form_Loss attribute specified for BB bridge channel <channel id>
ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for BB bridge channel <channel id>
Message Type
ERROR
Description
No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge). Please refer to the TUFLOW manual for more details on modelling bridges.
Suggestions
Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute.
Due to the potential for a divide by zero, a zero loss value can not be specified on the 1d_nwk layer if no LC table has been linked. A minimum loss value of 0.01 for B bridges or 0.001 for BB bridges will need to be specified in the 1d_nwk Form_Loss attribute.
| Up |
|---|
 1xxx Messages
|