Difference between revisions of "TUFLOW Message 1999"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 1998 - Water level of <water level> exceeds range in Channel <channel ID> at <time>. |alt_msg=N/A |type=ERROR |message_desc=The wate...")
 
Line 3: Line 3:
 
|alt_msg=N/A
 
|alt_msg=N/A
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=The water level in a 1D channel has exceeded the instability water level for the channel.  The default instability water level is 10 times the maximum depth in the cross-section for the channel.  This can be modified with the .ecf command: "<tt>Depth Limit Factor == </tt>".  This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number).
+
|message_desc=The water level in a 1D channel has exceeded the instability water level for the channel.  The default instability water level is 10 times the maximum depth in the cross-section for the channel.  This can be modified with the .ecf command: "<tt><font color="blue">Depth Limit Factor </font><font color="red">== </font></tt>".  This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number).
 
|suggestions=Please refer to Section 14.3 of the 2016 TUFLOW manual for tips on finding the start of an instability.
 
|suggestions=Please refer to Section 14.3 of the 2016 TUFLOW manual for tips on finding the start of an instability.
 
|discussion_page=* [[Talk:TUFLOW Message 1999|Discuss Message 1999]]
 
|discussion_page=* [[Talk:TUFLOW Message 1999|Discuss Message 1999]]

Revision as of 08:52, 24 June 2022

TUFLOW Message
ERROR 1998 - Water level of <water level> exceeds range in Channel <channel ID> at

Alternate Message
N/A

Message Type
ERROR

Description
The water level in a 1D channel has exceeded the instability water level for the channel. The default instability water level is 10 times the maximum depth in the cross-section for the channel. This can be modified with the .ecf command: "Depth Limit Factor == ". This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number).

Suggestions
Please refer to Section 14.3 of the 2016 TUFLOW manual for tips on finding the start of an instability.


Up
Go-up.png 1xxx Messages