Difference between revisions of "TUFLOW Message 1999"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
Melissa1987 (talk | contribs) |
||
| Line 5: | Line 5: | ||
|message_desc=The water level in a 1D channel has exceeded the instability water level for the channel. The default instability water level is 10 times the maximum depth in the cross-section for the channel. This can be modified with the .ecf command: "<tt><font color="blue">Depth Limit Factor </font><font color="red">== </font></tt>". This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number). | |message_desc=The water level in a 1D channel has exceeded the instability water level for the channel. The default instability water level is 10 times the maximum depth in the cross-section for the channel. This can be modified with the .ecf command: "<tt><font color="blue">Depth Limit Factor </font><font color="red">== </font></tt>". This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number). | ||
|suggestions=Please refer to Section 14.3 of the 2016 TUFLOW manual for tips on finding the start of an instability. | |suggestions=Please refer to Section 14.3 of the 2016 TUFLOW manual for tips on finding the start of an instability. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_1998|Message 1998]] | |prelink=[[TUFLOW_Message_1998|Message 1998]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_2001|Message 2001]] | |nextlink=[[TUFLOW_Message_2001|Message 2001]] | ||
}} | }} | ||
Revision as of 15:51, 5 July 2022
TUFLOW Message
ERROR 1998 - Water level of <water level> exceeds range in Channel <channel ID> at
Alternate Message
N/A
Message Type
ERROR
Description
The water level in a 1D channel has exceeded the instability water level for the channel. The default instability water level is 10 times the maximum depth in the cross-section for the channel. This can be modified with the .ecf command: "Depth Limit Factor == ". This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number).
Suggestions
Please refer to Section 14.3 of the 2016 TUFLOW manual for tips on finding the start of an instability.
| Up |
|---|
 1xxx Messages
|