Difference between revisions of "TUFLOW Message 2042"

From Tuflow
Jump to navigation Jump to search
 
(3 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=Cannot find or identify upstream ISIS unit node for 2D HX cell.   
 
|message_desc=Cannot find or identify upstream ISIS unit node for 2D HX cell.   
|suggestions=Check for missing or unsnapped CN lines.
+
|suggestions=Check for ISIS nodes that have been digitised within a 1d_x1d_nodes GIS layer that are not snapped to CN lines. For example, the figure below shows node FC01.25a does not have any associated CN connection lines digitised within a 2d_bc layer. Digitise the CN lines to connect the ISIS node to the 2D floodplain. <br>
|discussion_page=* [[Talk:TUFLOW Message 2042|Discuss Message 2042]]
+
<br>
|link3=''
+
[[File:Missing CN.PNG]]
|link4=''
+
 
|prelink=[[TUFLOW_Message_2041|Message 2041]]
+
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2043|Message 2043]]
 
 
}}
 
}}

Latest revision as of 11:04, 23 December 2022

TUFLOW Message
ERROR 2042 - Cannot find upstream ISIS unit node for 2D HX cell.

Alternate Message
NA

Message Type
ERROR

Description
Cannot find or identify upstream ISIS unit node for 2D HX cell.

Suggestions
Check for ISIS nodes that have been digitised within a 1d_x1d_nodes GIS layer that are not snapped to CN lines. For example, the figure below shows node FC01.25a does not have any associated CN connection lines digitised within a 2d_bc layer. Digitise the CN lines to connect the ISIS node to the 2D floodplain.

Missing CN.PNG


Up
Go-up.png 2xxx Messages