Difference between revisions of "TUFLOW Message 2043"
Melissa1987 (talk | contribs) |
|||
| Line 8: | Line 8: | ||
|suggestions= Check the node type within the ISIS .dat file and remove connection (CN) lines within the 2d_bc layer at any non-RIVER/INTERPOLATE units.<br> | |suggestions= Check the node type within the ISIS .dat file and remove connection (CN) lines within the 2d_bc layer at any non-RIVER/INTERPOLATE units.<br> | ||
Since TUFLOW built 2018-03-AC this error can be changed into warning by using command <font color="blue"><tt>SX FMP Unit Type Error</tt></font> <font color="red"><tt>== </tt></font> OFF. | Since TUFLOW built 2018-03-AC this error can be changed into warning by using command <font color="blue"><tt>SX FMP Unit Type Error</tt></font> <font color="red"><tt>== </tt></font> OFF. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_2042|Message 2042]] | |prelink=[[TUFLOW_Message_2042|Message 2042]] | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_2044|Message 2044]] | |nextlink=[[TUFLOW_Message_2044|Message 2044]] | ||
}} | }} | ||
Revision as of 13:04, 6 July 2022
TUFLOW Message
ERROR 2043 - 2D HX cell has been assigned to an ISIS non-RIVER unit.
Alternate Message
ERROR 2043 - Flow from 2D HX cell has been assigned to an ISIS non-RIVER unit. Flows from 2D HX cells can only be assigned to ISIS RIVER units.
WARNING 2043 - 2D HX cell has been assigned to an ISIS non-RIVER unit.
Description
2D HX cell has been assigned to an ISIS non-RIVER unit. Only ISIS RIVER units or INTERPOLATE units may be connected to a 2D HX boundary in a linked ISIS-TUFLOW model.
Suggestions
Check the node type within the ISIS .dat file and remove connection (CN) lines within the 2d_bc layer at any non-RIVER/INTERPOLATE units.
Since TUFLOW built 2018-03-AC this error can be changed into warning by using command SX FMP Unit Type Error == OFF.
| Up |
|---|
 2xxx Messages
|