Difference between revisions of "TUFLOW Message 2044"

From Tuflow
Jump to navigation Jump to search
(Created page with '{{TUFLOW_Message |tuflow_message=???? |message_desc=The ground level of the 2D cell (ZC level) is below the 1D bed level. 2D cells selected by 1D/2D (HX) interface lines must at...')
 
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=????
+
|tuflow_message=ERROR 2044 - 2D HX cell ZC level is below 1D bed level.
 +
|alt_msg=WARNING 2044 - 2D HX cell ZC level is below 1D bed level. <br> WARNING 2044 - ZC level of ",a," at 2D HX cell is below interpolated node bed level of
 +
|type=[[ERROR]] <br> [[WARNING]]
 
|message_desc=The ground level of the 2D cell (ZC level) is below the 1D bed level.  2D cells selected by 1D/2D (HX) interface lines must at or above the bed level of the 1D channel.  This error usually occurs when the 1D/2D interface line (HX line) passes through a depression that is lower than the bed levels of the 1D cross-sections.
 
|message_desc=The ground level of the 2D cell (ZC level) is below the 1D bed level.  2D cells selected by 1D/2D (HX) interface lines must at or above the bed level of the 1D channel.  This error usually occurs when the 1D/2D interface line (HX line) passes through a depression that is lower than the bed levels of the 1D cross-sections.
 
|suggestions=????
 
|suggestions=????
Line 7: Line 9:
 
|link4=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_2043|Message 2043]]
 
|prelink=[[TUFLOW_Message_2043|Message 2043]]
 +
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|nextlink=[[TUFLOW_Message_2045|Message 2045]]
 
|nextlink=[[TUFLOW_Message_2045|Message 2045]]
 
}}
 
}}

Revision as of 11:41, 1 October 2010

TUFLOW Message
ERROR 2044 - 2D HX cell ZC level is below 1D bed level.

Alternate Message
WARNING 2044 - 2D HX cell ZC level is below 1D bed level.
WARNING 2044 - ZC level of ",a," at 2D HX cell is below interpolated node bed level of

Message Type
ERROR
WARNING

Description
The ground level of the 2D cell (ZC level) is below the 1D bed level. 2D cells selected by 1D/2D (HX) interface lines must at or above the bed level of the 1D channel. This error usually occurs when the 1D/2D interface line (HX line) passes through a depression that is lower than the bed levels of the 1D cross-sections.

Suggestions
????


Up
Go-up.png 2xxx Messages