Difference between revisions of "TUFLOW Message 2053"

From Tuflow
Jump to navigation Jump to search
Line 4: Line 4:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=Exceeded maximum boundary condition table size, or table size is less than 1 row.
 
|message_desc=Exceeded maximum boundary condition table size, or table size is less than 1 row.
|suggestions=Search in the .tlf file for the error and identify a boundary condition .csv that was read just before the error was written. Check the .csv file for any extra lines and unnecessary information. If required create a new .csv file and populate with essential data only.
+
|suggestions=Search in the .tlf file for the error and identify a boundary condition .csv that was read just before the error was written. Strip the .csv file from any extra lines and unnecessary information. If required create a new .csv file and populate with essential data only.
 
|discussion_page=* [[Talk:TUFLOW Message 2053|Discuss Message 2053]]
 
|discussion_page=* [[Talk:TUFLOW Message 2053|Discuss Message 2053]]
 
|link3=''
 
|link3=''

Revision as of 14:13, 17 September 2019

TUFLOW Message
ERROR 2053 - Exceeded Maximum BC table size or table size is less than 1 row.

Alternate Message
NA

Message Type
ERROR

Description
Exceeded maximum boundary condition table size, or table size is less than 1 row.

Suggestions
Search in the .tlf file for the error and identify a boundary condition .csv that was read just before the error was written. Strip the .csv file from any extra lines and unnecessary information. If required create a new .csv file and populate with essential data only.


Up
Go-up.png 2xxx Messages