Difference between revisions of "TUFLOW Message 2053"

From Tuflow
Jump to navigation Jump to search
 
(4 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=Exceeded maximum boundary condition table size, or table size is less than 1 row.
 
|message_desc=Exceeded maximum boundary condition table size, or table size is less than 1 row.
|suggestions=????
+
|suggestions=Search in the .tlf file for the error and identify a boundary condition .csv that was read just before the error was written. Strip the .csv file from any extra lines and unnecessary information. If required create a new .csv file and populate with essential data only.
|discussion_page=* [[Talk:TUFLOW Message 2053|Discuss Message 2053]]
+
 
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_2052|Message 2052]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2054|Message 2054]]
 
 
}}
 
}}

Latest revision as of 11:47, 23 December 2022

TUFLOW Message
ERROR 2053 - Exceeded Maximum BC table size or table size is less than 1 row.

Alternate Message
NA

Message Type
ERROR

Description
Exceeded maximum boundary condition table size, or table size is less than 1 row.

Suggestions
Search in the .tlf file for the error and identify a boundary condition .csv that was read just before the error was written. Strip the .csv file from any extra lines and unnecessary information. If required create a new .csv file and populate with essential data only.


Up
Go-up.png 2xxx Messages