Difference between revisions of "TUFLOW Message 2083"

From Tuflow
Jump to navigation Jump to search
Line 4: Line 4:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=Unrecognisable SET command in .tgc file.  Check correct syntax/options have been specified.
 
|message_desc=Unrecognisable SET command in .tgc file.  Check correct syntax/options have been specified.
|suggestions=Check Appendix C (.tgc File Commands) of 2010 TUFLOW Manual for valid SET commands for geometry file (.tgc). Ensure double equal signs have been used, <font color="green"><tt>SET Code == 1</tt></font> <u> NOT </u><font color="green"><tt>SET Code = 1</tt></font>.
+
|suggestions=Check Appendix C (.tgc File Commands) of 2010 TUFLOW Manual for valid SET commands for geometry file (.tgc). Ensure double equal signs have been used, <font color="blue"><tt>SET Code </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt>1</tt></font> <u> NOT </u> <font color="blue"><tt>SET Code </tt></font><font color="red"><tt>= </tt></font><font color="black"><tt>1</tt></font>.
 
|discussion_page=* [[Talk:TUFLOW Message 2083|Discuss Message 2083]]
 
|discussion_page=* [[Talk:TUFLOW Message 2083|Discuss Message 2083]]
 
|link3=''
 
|link3=''

Revision as of 09:07, 27 June 2022

TUFLOW Message
ERROR 2083 - Unrecognisable SET command.

Alternate Message
NA

Message Type
ERROR

Description
Unrecognisable SET command in .tgc file. Check correct syntax/options have been specified.

Suggestions
Check Appendix C (.tgc File Commands) of 2010 TUFLOW Manual for valid SET commands for geometry file (.tgc). Ensure double equal signs have been used, SET Code == 1 NOT SET Code = 1.


Up
Go-up.png 2xxx Messages