Difference between revisions of "TUFLOW Message 2088"

From Tuflow
Jump to navigation Jump to search
Line 13: Line 13:
 
<font color="blue"><tt>GIS Supported Object Ignored </tt></font> <font color="red"><tt>==</tt></font><br>
 
<font color="blue"><tt>GIS Supported Object Ignored </tt></font> <font color="red"><tt>==</tt></font><br>
 
<font color="blue"><tt>GIS Unsupported Object </tt></font> <font color="red"><tt>==</tt></font><br>
 
<font color="blue"><tt>GIS Unsupported Object </tt></font> <font color="red"><tt>==</tt></font><br>
|discussion_page=* [[Talk:TUFLOW Message 2088|Discuss Message 2088]]
+
 
|link3=''
 
|link4=''
 
 
|prelink=[[TUFLOW_Message_2087|Message 2087]]
 
|prelink=[[TUFLOW_Message_2087|Message 2087]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|nextlink=[[TUFLOW_Message_2089|Message 2089]]
 
|nextlink=[[TUFLOW_Message_2089|Message 2089]]
 
}}
 
}}

Revision as of 13:19, 6 July 2022

TUFLOW Message
WARNING 2088 - Object below ignored. Only regions used for setting sub-domains.

Alternate Message
NA

Message Type
WARNING

Description
The GIS object has been ignored. At this stage in the processing, only region objects are required and a non region GIS object (e.g. point or line) has been found. For the 2016 release of TUFLOW this can be set to either a Warning or Error using the command:
GIS Supported Object Ignored == ERROR
or GIS Supported Object Ignored == WARNING
The default approach is for a Warning to be output.

Suggestions
Ensure that the data in the specified is correct.
See also the following commands in the TUFLOW manual for more detail on the options for handling unsupported or ignored GIS data.
GIS Supported Object Ignored ==
GIS Unsupported Object ==


Up
Go-up.png 2xxx Messages