Difference between revisions of "TUFLOW Message 2108"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
 
|message_desc=2D 1D/2D interface (HX) link applied more than once to 2D cell.  This often occurs when the line registers a 2D cell twice.  Usually not an issue, but may be an indicator that the line(s) have been digitised incorrectly or were accidentally repeated.
 
|message_desc=2D 1D/2D interface (HX) link applied more than once to 2D cell.  This often occurs when the line registers a 2D cell twice.  Usually not an issue, but may be an indicator that the line(s) have been digitised incorrectly or were accidentally repeated.
 
|suggestions=Check boundary configuration to determine reason for repeat application, if duplicate or incorrectly digitised lines remove / rectify.
 
|suggestions=Check boundary configuration to determine reason for repeat application, if duplicate or incorrectly digitised lines remove / rectify.
|discussion_page=* [[Talk:TUFLOW Message 2108|Discuss Message 2108]]
+
 
|link3=''
 
|link4=''
 
 
|prelink=[[TUFLOW_Message_2107|Message 2107]]
 
|prelink=[[TUFLOW_Message_2107|Message 2107]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|nextlink=[[TUFLOW_Message_2109|Message 2109]]
 
|nextlink=[[TUFLOW_Message_2109|Message 2109]]
 
}}
 
}}

Revision as of 13:33, 6 July 2022

TUFLOW Message
CHECK 2108 - 2D HX link applied more than once at cell.

Alternate Message
NA

Message Type
CHECK

Description
2D 1D/2D interface (HX) link applied more than once to 2D cell. This often occurs when the line registers a 2D cell twice. Usually not an issue, but may be an indicator that the line(s) have been digitised incorrectly or were accidentally repeated.

Suggestions
Check boundary configuration to determine reason for repeat application, if duplicate or incorrectly digitised lines remove / rectify.


Up
Go-up.png 2xxx Messages