Difference between revisions of "TUFLOW Message 2120"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=There is no global timestep or a specific timestep for 2D domain. wjs??? - what is a global timestep, it is not listed in manual. For each 2D domain, as defined in the .tcf with <font color="green"><tt>Start 2D Domain</tt></font> and <font color="green"><tt>End 2D Domain</tt></font>, a timestep must be specfied with a <font color="green"><tt>Timestep == </tt></font> command.
+
|message_desc=There is no global timestep or a specific timestep for 2D domain. The global timestep is specified by using <font color="green"><tt>Timestep ==</tt></font> outside a <font color="green"><tt>Start 2D Domain</tt></font> command block. For each 2D domain, as defined in the .tcf with <font color="green"><tt>Start 2D Domain</tt></font> and <font color="green"><tt>End 2D Domain</tt></font>, a timestep is specfied with a <font color="green"><tt>Timestep == </tt></font> command.  If no specific timestep is applied to a 2D domain, the global timestep is used.
 
|suggestions=Specify a timestep for each 2D domain in the model.
 
|suggestions=Specify a timestep for each 2D domain in the model.
 
|discussion_page=* [[Talk:TUFLOW Message 2120|Discuss Message 2120]]
 
|discussion_page=* [[Talk:TUFLOW Message 2120|Discuss Message 2120]]
 
|link3=''
 
|link3=''
 
|link4=''
 
|link4=''
|prelink=[[TUFLOW_Message_2118|Message 2118]]
+
|prelink=[[TUFLOW_Message_2119|Message 2119]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|nextlink=[[TUFLOW_Message_2121|Message 2121]]
 
|nextlink=[[TUFLOW_Message_2121|Message 2121]]
 
}}
 
}}

Revision as of 09:45, 7 December 2011

TUFLOW Message
ERROR 2120 - There is no global timestep or a specific timestep for 2D domain.

Alternate Message
NA

Message Type
ERROR

Description
There is no global timestep or a specific timestep for 2D domain. The global timestep is specified by using Timestep == outside a Start 2D Domain command block. For each 2D domain, as defined in the .tcf with Start 2D Domain and End 2D Domain, a timestep is specfied with a Timestep == command. If no specific timestep is applied to a 2D domain, the global timestep is used.

Suggestions
Specify a timestep for each 2D domain in the model.


Up
Go-up.png 2xxx Messages