Difference between revisions of "TUFLOW Message 2125"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
| − | |tuflow_message=ERROR 2125 - 2D domain "Cell Side Wet/Dry Depth" is greater than the "Cell Wet/Dry Depth". | + | |tuflow_message=ERROR 2125 - 2D domain "<font color="blue"><tt>Cell Side Wet/Dry Depth</tt></font>" is greater than the "<font color="blue"><tt>Cell Wet/Dry Depth</tt></font>". |
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=2D domain <font color=" | + | |message_desc=2D domain <font color="blue"><tt>Cell Side Wet/Dry Depth</tt></font> is greater than the <font color="blue"><tt>Cell Wet/Dry Depth</tt></font>. |
|suggestions=As of Build 2008 08 AA, this command has been disabled and the cell side wet/dry depth is always set to half the Cell Wet/Dry Depth value. This was implemented to prevent mass errors that sometimes occurred due to inappropriate cell side wet/dry depths being used. Does not apply if Defaults == PRE 2008-08. The default value of 0.001m remains unchanged. | |suggestions=As of Build 2008 08 AA, this command has been disabled and the cell side wet/dry depth is always set to half the Cell Wet/Dry Depth value. This was implemented to prevent mass errors that sometimes occurred due to inappropriate cell side wet/dry depths being used. Does not apply if Defaults == PRE 2008-08. The default value of 0.001m remains unchanged. | ||
|discussion_page=* [[Talk:TUFLOW Message 2125|Discuss Message 2125]] | |discussion_page=* [[Talk:TUFLOW Message 2125|Discuss Message 2125]] | ||
Revision as of 09:44, 27 June 2022
TUFLOW Message
ERROR 2125 - 2D domain "Cell Side Wet/Dry Depth" is greater than the "Cell Wet/Dry Depth".
Alternate Message
NA
Message Type
ERROR
Description
2D domain Cell Side Wet/Dry Depth is greater than the Cell Wet/Dry Depth.
Suggestions
As of Build 2008 08 AA, this command has been disabled and the cell side wet/dry depth is always set to half the Cell Wet/Dry Depth value. This was implemented to prevent mass errors that sometimes occurred due to inappropriate cell side wet/dry depths being used. Does not apply if Defaults == PRE 2008-08. The default value of 0.001m remains unchanged.
| Up |
|---|
 2xxx Messages
|