Difference between revisions of "TUFLOW Message 2151"
Melissa1987 (talk | contribs) |
Melissa1987 (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
|message_desc=No cyclone track points with attributes snapped to tracking line. When using the .tcf commands <font color="blue"><tt>Read GIS Cyclone </tt></font><font color="red"><tt>== </tt></font> or <font color="blue"><tt>Read GIS Hurricane </tt></font><font color="red"><tt>== </tt></font> to input cyclone / hurricane, the following logic is used by TUFLOW. The first polyline in the layer is read and used for the track. Points are snapped to the line wherever attribute data are to be assigned. It is not necessary to have points snapped to every vertex of the line – values will be interpolated between the digitised points. There must be points with attribute data snapped to the start and end of the polyline track. | |message_desc=No cyclone track points with attributes snapped to tracking line. When using the .tcf commands <font color="blue"><tt>Read GIS Cyclone </tt></font><font color="red"><tt>== </tt></font> or <font color="blue"><tt>Read GIS Hurricane </tt></font><font color="red"><tt>== </tt></font> to input cyclone / hurricane, the following logic is used by TUFLOW. The first polyline in the layer is read and used for the track. Points are snapped to the line wherever attribute data are to be assigned. It is not necessary to have points snapped to every vertex of the line – values will be interpolated between the digitised points. There must be points with attribute data snapped to the start and end of the polyline track. | ||
|suggestions=Check cyclone track data and ensure points are snapped to polyline (cyclone track). | |suggestions=Check cyclone track data and ensure points are snapped to polyline (cyclone track). | ||
| − | + | ||
| − | + | ||
| − | |||
| − | |||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | + | ||
}} | }} | ||
Latest revision as of 13:43, 7 February 2023
TUFLOW Message
ERROR 2151 - No cyclone track points with attributes snapped to tracking line.
Alternate Message
NA
Message Type
ERROR
Description
No cyclone track points with attributes snapped to tracking line. When using the .tcf commands Read GIS Cyclone == or Read GIS Hurricane == to input cyclone / hurricane, the following logic is used by TUFLOW. The first polyline in the layer is read and used for the track. Points are snapped to the line wherever attribute data are to be assigned. It is not necessary to have points snapped to every vertex of the line – values will be interpolated between the digitised points. There must be points with attribute data snapped to the start and end of the polyline track.
Suggestions
Check cyclone track data and ensure points are snapped to polyline (cyclone track).
| Up |
|---|
 2xxx Messages
|