Difference between revisions of "TUFLOW Message 2221"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
 
|message_desc=Layer has insufficient attributes for the specified layer type.  For example a 2d_fcsh layer should have the attributes listed in Table 4.19 of the 2010 TUFLOW manual.
 
|message_desc=Layer has insufficient attributes for the specified layer type.  For example a 2d_fcsh layer should have the attributes listed in Table 4.19 of the 2010 TUFLOW manual.
 
|suggestions=Ensure layer has correct attributes as defined by the TUFLOW manual or the empty (template) files created by TUFLOW with the <font color="blue"><tt>Write Empty MI Files </tt></font><font color="red"><tt>== </tt></font> .tcf command.
 
|suggestions=Ensure layer has correct attributes as defined by the TUFLOW manual or the empty (template) files created by TUFLOW with the <font color="blue"><tt>Write Empty MI Files </tt></font><font color="red"><tt>== </tt></font> .tcf command.
|discussion_page=* [[Talk:TUFLOW Message 2221|Discuss Message 2221]]
+
 
|link3=''
 
|link4=''
 
 
|prelink=[[TUFLOW_Message_2220|Message 2220]]
 
|prelink=[[TUFLOW_Message_2220|Message 2220]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|nextlink=[[TUFLOW_Message_2222|Message 2222]]
 
|nextlink=[[TUFLOW_Message_2222|Message 2222]]
 
}}
 
}}

Revision as of 14:26, 6 July 2022

TUFLOW Message
ERROR 2221 - Insufficient number of attributes for 2d_fcsh layer.

Alternate Message
ERROR 2221 - Insufficient number of attributes for 2d_hx (2d_bc) layer.
ERROR 2221 - Insufficient number of attributes for 2d_lfcsh layer.
ERROR 2221 - Insufficient number of attributes for 2d_vzsh layer.
ERROR 2221 - Insufficient number of attributes for 2d_zrsh layer.
ERROR 2221 - Insufficient number of attributes for 2d_zsh layer.

Message Type
ERROR

Description
Layer has insufficient attributes for the specified layer type. For example a 2d_fcsh layer should have the attributes listed in Table 4.19 of the 2010 TUFLOW manual.

Suggestions
Ensure layer has correct attributes as defined by the TUFLOW manual or the empty (template) files created by TUFLOW with the Write Empty MI Files == .tcf command.


Up
Go-up.png 2xxx Messages