Difference between revisions of "TUFLOW Message 2306"
Jump to navigation
Jump to search
Steph.dufour (talk | contribs) |
|||
| Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
| − | |tuflow_message=ERROR 2306 - | + | |tuflow_message=ERROR 2306 - WrF value must be greater than zero |
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
Revision as of 20:41, 18 June 2015
TUFLOW Message
ERROR 2306 - WrF value must be greater than zero
Alternate Message
NA
Message Type
ERROR
Description
Occurs when a WrF (Weir calibration factor for upstream controlled weir flow) of zero has been found.
Suggestions
Check for zero values that may have been inadvertently applied using one or a combination of the following commands: Read GIS WrF==, Set WrF==, Read RowCol WrF==.
| Up |
|---|
 2xxx Messages
|