Difference between revisions of "TUFLOW Message 2365"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
 
|message_desc=Water level at '''HQ''' boundary has exceeded the top of the defined stage (H) V's flow (Q) relationship.
 
|message_desc=Water level at '''HQ''' boundary has exceeded the top of the defined stage (H) V's flow (Q) relationship.
 
|suggestions=If a stage-discharge relationship has been defined consider extending this relationship for higher water levels.  If a stage-discharge relationship is calculated by TUFLOW by defining a water surface slope, the boundary should be extended to higher ground.
 
|suggestions=If a stage-discharge relationship has been defined consider extending this relationship for higher water levels.  If a stage-discharge relationship is calculated by TUFLOW by defining a water surface slope, the boundary should be extended to higher ground.
 +
<br>
 +
The 2d_bc “d” attribute can be used to set the maximum depth of the automatically generated HQ curve (note d is a depth, not an elevation).<br>
 +
See also this post on the TUFLOW forum:<br>
 +
[http://www.tuflow.com/forum//index.php?showtopic=943 WARNING 2365 - Exceeded top of HQ curve.]
  
par??? insert image here.
 
 
|discussion_page=* [[Talk:TUFLOW Message 2365|Discuss Message 2365]]
 
|discussion_page=* [[Talk:TUFLOW Message 2365|Discuss Message 2365]]
 
|link3=''
 
|link3=''

Revision as of 10:28, 13 March 2012

TUFLOW Message
WARNING 2365 - Exceeded top of HQ curve.

Alternate Message
NA

Message Type
WARNING

Description
Water level at HQ boundary has exceeded the top of the defined stage (H) V's flow (Q) relationship.

Suggestions
If a stage-discharge relationship has been defined consider extending this relationship for higher water levels. If a stage-discharge relationship is calculated by TUFLOW by defining a water surface slope, the boundary should be extended to higher ground.
The 2d_bc “d” attribute can be used to set the maximum depth of the automatically generated HQ curve (note d is a depth, not an elevation).
See also this post on the TUFLOW forum:
WARNING 2365 - Exceeded top of HQ curve.


Up
Go-up.png 2xxx Messages