Difference between revisions of "TUFLOW Message 2365"
Jump to navigation
Jump to search
m (Protected "TUFLOW Message 2365" ([edit=sysop] (indefinite) [move=sysop] (indefinite))) |
|
(No difference)
| |
Revision as of 10:29, 13 March 2012
TUFLOW Message
WARNING 2365 - Exceeded top of HQ curve.
Alternate Message
NA
Message Type
WARNING
Description
Water level at HQ boundary has exceeded the top of the defined stage (H) V's flow (Q) relationship.
Suggestions
If a stage-discharge relationship has been defined consider extending this relationship for higher water levels. If a stage-discharge relationship is calculated by TUFLOW by defining a water surface slope, the boundary should be extended to higher ground.
The 2d_bc “d” attribute can be used to set the maximum depth of the automatically generated HQ curve (note d is a depth, not an elevation).
See also this post on the TUFLOW forum:
WARNING 2365 - Exceeded top of HQ curve.
| Up |
|---|
 2xxx Messages
|