Difference between revisions of "TUFLOW Message 2460"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[WARNING]] | |type=[[WARNING]] | ||
|message_desc=???? | |message_desc=???? | ||
| − | |suggestions=Check that the attribute(s) should have a zero value otherwise no rainfall for this GIS object will be applied during the simulation. This WARNING occurs where the user has accidentally forgotten to assign values to the attribute(s) | + | |suggestions=Check that the attribute(s) should have a zero value otherwise no rainfall for this GIS object will be applied during the simulation. This WARNING occurs where the user has accidentally forgotten to assign values to the attribute(s), and the default setting for these attributes if using a GIS is zero. |
|discussion_page=* [[Talk:TUFLOW Message 2460|Discuss Message 2460]] | |discussion_page=* [[Talk:TUFLOW Message 2460|Discuss Message 2460]] | ||
|link3='' | |link3='' | ||
Revision as of 13:05, 21 February 2011
TUFLOW Message
WARNING 2460 - RF f1 and/or f2 attribute set to zero - no rainfall will be applied.
Alternate Message
WARNING 2460 - SA RF Catchment_Area and/or Rain_Gauge_Factor attribute set to zero - no rainfall will be applied.
Message Type
WARNING
Description
????
Suggestions
Check that the attribute(s) should have a zero value otherwise no rainfall for this GIS object will be applied during the simulation. This WARNING occurs where the user has accidentally forgotten to assign values to the attribute(s), and the default setting for these attributes if using a GIS is zero.
| Up |
|---|
 2xxx Messages
|