Difference between revisions of "TUFLOW Message 2461"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
Melissa1987 (talk | contribs) |
||
| Line 8: | Line 8: | ||
* <tt><font color="blue">Global Rainfall Initial Loss </font><font color="red">== </font><value></tt> | * <tt><font color="blue">Global Rainfall Initial Loss </font><font color="red">== </font><value></tt> | ||
* <tt><font color="blue">Global Rainfall Initial Loss </font><font color="red">== </font><value></tt> | * <tt><font color="blue">Global Rainfall Initial Loss </font><font color="red">== </font><value></tt> | ||
| − | should be specified prior to any <tt>Global Rainfall BC == <boundary name></tt> command. | + | should be specified prior to any <tt><font color="blue">Global Rainfall BC </font><font color="red">== </font><boundary name></tt> command. |
| − | |suggestions=Change the order of the commands in the boundary control file (.tbc) to ensure that the rainfall loss and rainfall factor commands occur before the <tt>Global Rainfall BC == <boundary name></tt> command. | + | |suggestions=Change the order of the commands in the boundary control file (.tbc) to ensure that the rainfall loss and rainfall factor commands occur before the <tt><font color="blue">Global Rainfall BC </font><font color="red">== </font><boundary name></tt> command. |
|discussion_page=* [[Talk:TUFLOW Message 2461|Discuss Message 2461]] | |discussion_page=* [[Talk:TUFLOW Message 2461|Discuss Message 2461]] | ||
|link3='' | |link3='' | ||
Revision as of 13:20, 27 June 2022
TUFLOW Message
ERROR 2461 - "Global Rainfall Area Factor" applied after "Global Rainfall BC".
Alternate Message
ERROR 2461 - "Global Rainfall Initial Loss" applied after "Global Rainfall BC".
ERROR 2461 - "Global Rainfall Initial Loss" applied after "Global Rainfall BC".
Message Type
ERROR
Description
The global rainfall commands:
- Global Rainfall Area Factor == <value>
- Global Rainfall Initial Loss == <value>
- Global Rainfall Initial Loss == <value>
should be specified prior to any Global Rainfall BC == <boundary name> command.
Suggestions
Change the order of the commands in the boundary control file (.tbc) to ensure that the rainfall loss and rainfall factor commands occur before the Global Rainfall BC == <boundary name> command.
| Up |
|---|
 2xxx Messages
|