Difference between revisions of "TUFLOW Message 2461"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
Melissa1987 (talk | contribs) |
||
| Line 10: | Line 10: | ||
should be specified prior to any <tt><font color="blue">Global Rainfall BC </font><font color="red">== </font><boundary name></tt> command. | should be specified prior to any <tt><font color="blue">Global Rainfall BC </font><font color="red">== </font><boundary name></tt> command. | ||
|suggestions=Change the order of the commands in the boundary control file (.tbc) to ensure that the rainfall loss and rainfall factor commands occur before the <tt><font color="blue">Global Rainfall BC </font><font color="red">== </font><boundary name></tt> command. | |suggestions=Change the order of the commands in the boundary control file (.tbc) to ensure that the rainfall loss and rainfall factor commands occur before the <tt><font color="blue">Global Rainfall BC </font><font color="red">== </font><boundary name></tt> command. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_2460|Message 2460]] | |prelink=[[TUFLOW_Message_2460|Message 2460]] | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_2467|Message 2467]] | |nextlink=[[TUFLOW_Message_2467|Message 2467]] | ||
}} | }} | ||
Revision as of 15:52, 6 July 2022
TUFLOW Message
ERROR 2461 - "Global Rainfall Area Factor" applied after "Global Rainfall BC".
Alternate Message
ERROR 2461 - "Global Rainfall Initial Loss" applied after "Global Rainfall BC".
ERROR 2461 - "Global Rainfall Initial Loss" applied after "Global Rainfall BC".
Message Type
ERROR
Description
The global rainfall commands:
- Global Rainfall Area Factor == <value>
- Global Rainfall Initial Loss == <value>
- Global Rainfall Initial Loss == <value>
should be specified prior to any Global Rainfall BC == <boundary name> command.
Suggestions
Change the order of the commands in the boundary control file (.tbc) to ensure that the rainfall loss and rainfall factor commands occur before the Global Rainfall BC == <boundary name> command.
| Up |
|---|
 2xxx Messages
|