Difference between revisions of "TUFLOW Message 2467"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 6: | Line 6: | ||
|suggestions=Modify the flow constriction shapes to avoid overlapping. If the overlap is intentional, consider using a different flow constriction combining parameters from the original flow constrictions. | |suggestions=Modify the flow constriction shapes to avoid overlapping. If the overlap is intentional, consider using a different flow constriction combining parameters from the original flow constrictions. | ||
| − | |prelink=[[ | + | |prelink=[[TUFLOW_Message_2466|Message 2466]] |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_2468|Message 2468]] | |nextlink=[[TUFLOW_Message_2468|Message 2468]] | ||
}} | }} | ||
Revision as of 11:19, 16 December 2022
TUFLOW Message
CHECK 2467 - Layered Flow Constriction Shape overlaps with Flow Constriction Shape at ZV point.
Alternate Message
N/A
Message Type
CHECK
Description
A cell side encountered overlapping flow constrictions.
Suggestions
Modify the flow constriction shapes to avoid overlapping. If the overlap is intentional, consider using a different flow constriction combining parameters from the original flow constrictions.
| Up |
|---|
 2xxx Messages
|