Difference between revisions of "TUFLOW Message 2467"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 6: | Line 6: | ||
|type=[[CHECK]]<br>[[ERROR]] | |type=[[CHECK]]<br>[[ERROR]] | ||
|message_desc=A cell side encountered overlapping flow constrictions. | |message_desc=A cell side encountered overlapping flow constrictions. | ||
| − | |suggestions=Modify the flow constriction shapes to avoid overlapping. If the overlap is intentional, use a different flow constriction combining parameters from the original flow constrictions | + | |suggestions=From 2023 release, overlapping flow constriction triggers an error.<br> Modify the flow constriction shapes to avoid overlapping. If the overlap is intentional, use a different flow constriction combining parameters from the original flow constrictions. <br> |
| − | + | ||
Latest revision as of 09:20, 25 August 2023
TUFLOW Message
CHECK 2467 - Layered Flow Constriction Shape overlaps with Flow Constriction Shape at ZV point.
Alternate Message
CHECK 2467 - Layered Flow Constriction Shape overlaps with Flow Constriction Shape at ZU point.
ERROR 2467 - Overlapping Layered Flow Constriction Shape at ZU point.
ERROR 2467 - Overlapping Layered Flow Constriction Shape at ZV point.
Description
A cell side encountered overlapping flow constrictions.
Suggestions
From 2023 release, overlapping flow constriction triggers an error.
Modify the flow constriction shapes to avoid overlapping. If the overlap is intentional, use a different flow constriction combining parameters from the original flow constrictions.
| Up |
|---|
 2xxx Messages
|