TUFLOW Message 2592

From Tuflow
Revision as of 09:36, 9 April 2024 by RustyJonesTUFLOW (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
WARNING 2592 - Ignoring "Hardware ==" command due to -hw command line options

Alternate Message
NA

Message Type
WARNING

Description
When TUFLOW was launched, -hwgpu or -hwcpu was specified controlling whether the simulation is running on the CPU or the GPU. Any commands in the tcf file are overridden by the command line specification.

Suggestions
Make sure that the command line arguments match the desired run mode.


Up
Go-up.png 2xxx Messages