TUFLOW Message 2618

From Tuflow
Revision as of 09:43, 3 March 2023 by Melissa1987 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
WARNING 2618 - F1 rainfall factor of 0 set to 1. RF Name: <name>

Alternate Message
WARNING 2618 - F2 rainfall factor of 0 set to 1. RF Name: <name>

Message Type

The F1 or F2 attribute in the GIS table for the rainfall point layer has not been set and is zero (or less). These factors are applied as a multiplier on the rainfall boundary.

It is recommended that if no rainfall factor is desired that these are set to 1 for clarity. A value of 1 has overwritten the specified value of 0.

Go-up.png 2xxx Messages