Difference between revisions of "TUFLOW Message 2787"

From Tuflow
Jump to navigation Jump to search
Line 4: Line 4:
 
|type=[[WARNING]]
 
|type=[[WARNING]]
 
|message_desc=This warning occurs for TUFLOW HPC simulations when SA boundaries are applied with Defaults set prior to 2017.
 
|message_desc=This warning occurs for TUFLOW HPC simulations when SA boundaries are applied with Defaults set prior to 2017.
|suggestions=was TUFLOW HPC was only released in 2017. Setting Defaults prior to 2017 should not be used.
+
|suggestions=TUFLOW HPC was only released in 2017. Setting Defaults prior to 2017 should not be used.
 
|discussion_page=* [[Talk:TUFLOW Message 2787|Discuss Message 2787]]
 
|discussion_page=* [[Talk:TUFLOW Message 2787|Discuss Message 2787]]
 
|link3=''
 
|link3=''

Revision as of 15:17, 18 June 2019

TUFLOW Message
WARNING 2787 - SA boundary applied as SA ALL due to use of "Defaults" command.

Alternate Message
NA

Message Type
WARNING

Description
This warning occurs for TUFLOW HPC simulations when SA boundaries are applied with Defaults set prior to 2017.

Suggestions
TUFLOW HPC was only released in 2017. Setting Defaults prior to 2017 should not be used.


Up
Go-up.png 2xxx Messages