TUFLOW Message 2787

From Tuflow
Revision as of 11:48, 2 July 2019 by ShuangGao (talk | contribs)
Jump to navigation Jump to search

TUFLOW Message
WARNING 2787 - SA boundary applied as SA ALL due to use of "Defaults" command.

Alternate Message
NA

Message Type
WARNING

Description
This warning occurs for TUFLOW HPC simulations when SA ALL option is turned on because the "Defaults" command are set prior to 2017.

Suggestions
TUFLOW HPC was only released in 2017. Please check if it is intentional to apply default settings prior to 2017 for TUFLOW HPC simulations.


Up
Go-up.png 2xxx Messages