Difference between revisions of "TUFLOW Message 2812"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[WARNING]]
 
|type=[[WARNING]]
|message_desc=No quadtree nesting was found, the quadtree mesh will be created with single level.
+
|message_desc=This warning occurs if a quadtree control file is specified, but only one quadtree nesting level was used. The quadtree mesh will be created with single level.
|suggestions=Check if nesting should be applied.
+
|suggestions=Omit this warning if it is intended to use one level, or check if nesting should be applied.
 
|discussion_page=* [[Talk:TUFLOW Message 2812|Discuss Message 2812]]
 
|discussion_page=* [[Talk:TUFLOW Message 2812|Discuss Message 2812]]
 
|link3=''
 
|link3=''

Revision as of 16:21, 22 September 2020

TUFLOW Message
WARNING 2812 - No quadtree nesting, largest nesting level = 1.

Alternate Message
NA

Message Type
WARNING

Description
This warning occurs if a quadtree control file is specified, but only one quadtree nesting level was used. The quadtree mesh will be created with single level.

Suggestions
Omit this warning if it is intended to use one level, or check if nesting should be applied.


Up
Go-up.png 2xxx Messages