Difference between revisions of "TUFLOW Message 2839"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2839 - Split polyline should not have more vertexes than the original polyline[qpc_get_line_faces]<br> WARNING 2836 - No cells selected...")
 
 
(10 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 2839 - Split polyline should not have more vertexes than the original polyline[qpc_get_line_faces]<br>
+
|tuflow_message=ERROR 2839 - Unable to split polyline according to QPC mesh
WARNING 2836 - No cells selected by point object: aa BC layer with type: bb
+
|alt_msg=ERROR 2839 - Split polyline should not have more vertexes than the original polyline
|alt_msg=N/A
 
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=Split polyline should not have more vertexes than the original polyline.
+
|message_desc=This error can occur for any line features, for example when PO lines or part of PO lines are outside the model area for Quadtree models.
|suggestions=Contact support@tuflow.com.
+
|suggestions=Inspect line feature associated with the error message. Check that all PO lines are located within the model area.
|discussion_page=* [[Talk:TUFLOW Message 2839|Discuss Message 2839]]
+
 
|link3=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_2836|Message 2836]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2844|Message 2844]]
 
 
}}
 
}}

Latest revision as of 16:03, 23 February 2024

TUFLOW Message
ERROR 2839 - Unable to split polyline according to QPC mesh

Alternate Message
ERROR 2839 - Split polyline should not have more vertexes than the original polyline

Message Type
ERROR

Description
This error can occur for any line features, for example when PO lines or part of PO lines are outside the model area for Quadtree models.

Suggestions
Inspect line feature associated with the error message. Check that all PO lines are located within the model area.


Up
Go-up.png 2xxx Messages