Difference between revisions of "TUFLOW Message 3008"

From Tuflow
Jump to navigation Jump to search
 
(9 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 3008: XX must be >= 0.
+
|tuflow_message=ERROR 3008 - tau0 must be >= 0.
<br>  
+
|alt_msg=ERROR 3008 - muLow must be >= 0.<br>
|alt_msg=none
+
ERROR 3008 - muHigh must be >= <number>.
 
|type=[[ERROR]]  
 
|type=[[ERROR]]  
|message_desc=XX.
+
|message_desc=For the non-Newtonian viscosity formulation both tau0 and muLow cannot be negative. Further, the upper limit muHigh cannot be less than muLow.
|suggestions=XX.  
+
|suggestions=Ensure the supplied viscosity coefficients are correct.  
  
|discussion_page=* [[Talk:TUFLOW Message 3008|Discuss Message 3008]]
 
|link3=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_3007|Message 3007]]
 
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
|nextlink=[[TUFLOW_Message_3009|Message 3009]]
 
 
}}
 
}}

Latest revision as of 10:10, 3 March 2023

TUFLOW Message
ERROR 3008 - tau0 must be >= 0.

Alternate Message
ERROR 3008 - muLow must be >= 0.
ERROR 3008 - muHigh must be >= <number>.

Message Type
ERROR

Description
For the non-Newtonian viscosity formulation both tau0 and muLow cannot be negative. Further, the upper limit muHigh cannot be less than muLow.

Suggestions
Ensure the supplied viscosity coefficients are correct.


Up
Go-up.png 3xxx Messages