Difference between revisions of "TUFLOW Message 3027"
Jump to navigation
Jump to search
Teegan.Burke (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 3027: Roughness height specified but nLim less than 0. <br> |alt_msg=None |type=ERROR |message_desc=The limiting Manning’s n va...") |
(No difference)
|
Revision as of 17:11, 19 April 2018
TUFLOW Message
ERROR 3027: Roughness height specified but nLim less than 0.
Alternate Message
None
Message Type
ERROR
Description
The limiting Manning’s n value, required for specifying bed resistance with the theoretically derived log law for shallow flows, must be greater than or equal to 0.0.
Suggestions
A limiting Manning’s n value based on the n value that would normally be applied is also specified to transition to conventional n values at greater depths.
| Up |
|---|
 3xxx Messages
|