Difference between revisions of "TUFLOW Message 3034"

From Tuflow
Jump to navigation Jump to search
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 3034: Number of hydrograph index layers exceeded. Maximum is 4.
+
|tuflow_message=ERROR 3034 - Number of hydrograph index layers exceeded. Maximum is 4.
 
<br>  
 
<br>  
|alt_msg=ERROR 3034: Number of hydrograph weight layers exceeded. Maximum is 4.
+
|alt_msg=ERROR 3034 - Number of hydrograph weight layers exceeded. Maximum is 4.
  
 
|type=[[ERROR]]  
 
|type=[[ERROR]]  
|message_desc=In HPC solver, the number of hydrograph assigned at one cell is limited to 4 due to the memory management.
+
|message_desc=It is permissible to have overlapping RF and SA regions that apply sources to underlying cells. However, HPC
|suggestions=Reduce the number of hydrographs, e.g. 2d_sa, 2d_rf, specified at a single cell.
+
has an inbuilt limit of 4 for the number of such sources that can be applied to any given cell.
 +
|suggestions=Check the RF and SA region definitions and ensure that there are not more than four overlapping at any point.
  
 
|prelink=[[TUFLOW_Message_3033|Message 3033]]
 
|prelink=[[TUFLOW_Message_3033|Message 3033]]

Revision as of 16:24, 2 March 2023

TUFLOW Message
ERROR 3034 - Number of hydrograph index layers exceeded. Maximum is 4.

Alternate Message
ERROR 3034 - Number of hydrograph weight layers exceeded. Maximum is 4.

Message Type
ERROR

Description
It is permissible to have overlapping RF and SA regions that apply sources to underlying cells. However, HPC has an inbuilt limit of 4 for the number of such sources that can be applied to any given cell.

Suggestions
Check the RF and SA region definitions and ensure that there are not more than four overlapping at any point.


Up
Go-up.png 3xxx Messages