Difference between revisions of "TUFLOW Message 3048"

From Tuflow
Jump to navigation Jump to search
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 3048 - shearStressH1 must be > shearStressH0.
+
|tuflow_message=ERROR 3048 - Wind/Wave Shallow Depth 2 must be > Depth 1.
 
|alt_msg=NA<br>
 
|alt_msg=NA<br>
  
 
|type=[[ERROR]]  
 
|type=[[ERROR]]  
|message_desc=To be documented.  
+
|message_desc=When applying wind/wave stresses the applied stress is blended between two threshold depths. Refer to the "<font color="blue"><tt>Wind/Wave Shallow Depths</tt></font>" command. The upper threshold depth is not greater than the lower threshold depth.
|suggestions=Please contact <u>[mailto:support@tuflow.com support@tuflow.com]</u> for more information.
+
|suggestions=Review the values supplied to the "<font color="blue"><tt>Wind/Wave Shallow Depths</tt></font>" command.
  
 
|prelink=[[TUFLOW_Message_3047|Message 3047]]
 
|prelink=[[TUFLOW_Message_3047|Message 3047]]

Revision as of 16:55, 2 March 2023

TUFLOW Message
ERROR 3048 - Wind/Wave Shallow Depth 2 must be > Depth 1.

Alternate Message
NA

Message Type
ERROR

Description
When applying wind/wave stresses the applied stress is blended between two threshold depths. Refer to the "Wind/Wave Shallow Depths" command. The upper threshold depth is not greater than the lower threshold depth.

Suggestions
Review the values supplied to the "Wind/Wave Shallow Depths" command.


Up
Go-up.png 3xxx Messages