Difference between revisions of "TUFLOW Message 3048"

From Tuflow
Jump to navigation Jump to search
 
(5 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 3048: shearStressH1 must be > shearStressH0.
+
|tuflow_message=ERROR 3048 - Wind/Wave Shallow Depth 2 must be > Depth 1.
<br>  
+
|alt_msg=NA<br>
|alt_msg=N/A
 
  
 
|type=[[ERROR]]  
 
|type=[[ERROR]]  
|message_desc=To be documented.  
+
|message_desc=When applying wind/wave stresses the applied stress is blended between two threshold depths. Refer to the "<font color="blue"><tt>Wind/Wave Shallow Depths</tt></font>" command. The upper threshold depth is not greater than the lower threshold depth.
|suggestions=Please contact [mailto:support@tuflow.com support@tuflow.com] for more information.
+
|suggestions=Review the values supplied to the "<font color="blue"><tt>Wind/Wave Shallow Depths</tt></font>" command.
  
|discussion_page=* [[Talk:TUFLOW Message 3048|Discuss Message 3048]]
 
|link3=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_3047|Message 3047]]
 
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
|nextlink=[[TUFLOW_Message_3504|Message 3504]]
 
 
}}
 
}}

Latest revision as of 10:19, 3 March 2023

TUFLOW Message
ERROR 3048 - Wind/Wave Shallow Depth 2 must be > Depth 1.

Alternate Message
NA

Message Type
ERROR

Description
When applying wind/wave stresses the applied stress is blended between two threshold depths. Refer to the "Wind/Wave Shallow Depths" command. The upper threshold depth is not greater than the lower threshold depth.

Suggestions
Review the values supplied to the "Wind/Wave Shallow Depths" command.


Up
Go-up.png 3xxx Messages