Difference between revisions of "TUFLOW Message 3517"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
etc | etc | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=These commands/functions are not supported | + | |message_desc=These commands/functions are not supported in SGS with the used TUFLOW version. |
| − | |suggestions= | + | |suggestions=Use the latest version of TUFLOW available from the TUFLOW website. Alternatively, remove these features to run in SGS, or contact <font color="blue">support@tuflow.com</font> for further assistance. |
|discussion_page=* [[Talk:TUFLOW Message 3517|Discuss Message 3517]] | |discussion_page=* [[Talk:TUFLOW Message 3517|Discuss Message 3517]] | ||
Revision as of 13:20, 26 May 2020
TUFLOW Message
ERROR 3517: Z Shape Route not supported yet in SGS. Please contact support@tuflow.com.
Alternate Message
ERROR 3517: HX 2D BC not supported yet in SGS. Please contact support@tuflow.com.
ERROR 3517: Interpolate ZUVH not supported yet in SGS. Please contact support@tuflow.com.
ERROR 3517: ZC == MIN(ZU,ZV) not supported yet in SGS. Please contact support@tuflow.com.
etc
Message Type
ERROR
Description
These commands/functions are not supported in SGS with the used TUFLOW version.
Suggestions
Use the latest version of TUFLOW available from the TUFLOW website. Alternatively, remove these features to run in SGS, or contact support@tuflow.com for further assistance.
| Up |
|---|
 3xxx Messages
|