TUFLOW Message 3526

From Tuflow
Revision as of 10:43, 16 December 2022 by ElizaCollison (talk | contribs)
Jump to navigation Jump to search

TUFLOW Message
WARNING 3526 - SGS Sample Distance specified, but SGS == Off.

Alternate Message
WARNING 3526 - SGS Sample Distance command is ignored in SGS Approach == Method C.

Message Type
WARNING

Description
SGS Sample Distance is specified in .tgc file, but SGS == Off in .tcf file. If Method C is used, SGS Sample Frequency is used instead of SGS Sample Distance.

Suggestions
Check if SGS should be switched on. Remove SGS Sample Distance command if using Method C.


Up
Go-up.png 3xxx Messages