Difference between revisions of "TUFLOW Message 3530"

From Tuflow
Jump to navigation Jump to search
Line 6: Line 6:
 
|suggestions=Use the <font color="blue"><tt>SGS Depth Output</tt></font> command to set the cutoff option, and use <font color="blue"><tt>Map Cutoff Depth</tt></font> command to set the cutoff value in a similar manner to non-SGS models.
 
|suggestions=Use the <font color="blue"><tt>SGS Depth Output</tt></font> command to set the cutoff option, and use <font color="blue"><tt>Map Cutoff Depth</tt></font> command to set the cutoff value in a similar manner to non-SGS models.
  
|prelink=[[TUFLOW_Message_3526|Message 3526]]
+
|prelink=[[TUFLOW_Message_3529|Message 3529]]
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
 
|nextlink=[[TUFLOW_Message_3531|Message 3531]]
 
|nextlink=[[TUFLOW_Message_3531|Message 3531]]
 
}}
 
}}

Revision as of 10:45, 16 December 2022

TUFLOW Message
WARNING 3530 - "Map Cutoff SGS" command has been replaced by "SGS Depth Output" command as of 2020-10-AB release. Please replace the command.

Alternate Message
WARNING 3530 - "SGS Depth Interpolation Approach" command has been replaced by "SGS Depth Output" command as of 2020-10-AB release. Please replace the command.

Message Type
WARNING

Description
To ensure consistency between SGS map cutoff depth and SGS depth interpolation method, Map Cutoff SGS and SGS Depth Interpolation Approach commands have been merged into a single command SGS Depth Output for Build 2020-10-AB. The Map Cutoff SGS command is still supported in Build 2020-10-AB but will be retired in a future release.

Suggestions
Use the SGS Depth Output command to set the cutoff option, and use Map Cutoff Depth command to set the cutoff value in a similar manner to non-SGS models.


Up
Go-up.png 3xxx Messages