Difference between revisions of "TUFLOW Message 3543"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 5: | Line 5: | ||
|message_desc=This is the output message from SGS Breakline Detection feature. A levee or embankment has been detected during the SGS pre-processing. | |message_desc=This is the output message from SGS Breakline Detection feature. A levee or embankment has been detected during the SGS pre-processing. | ||
|suggestions=Consider adding breakline to prevent water from "leaking" through the cells. | |suggestions=Consider adding breakline to prevent water from "leaking" through the cells. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_3539|Message 3539]] | |prelink=[[TUFLOW_Message_3539|Message 3539]] | ||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_3991|Message 3991]] | |nextlink=[[TUFLOW_Message_3991|Message 3991]] | ||
}} | }} | ||
Revision as of 15:25, 13 July 2022
TUFLOW Message
CHECK 3543 - Water depth required cross cell exceeds specified threshold, consider adding breakline. uDelta = "a", vDelta = "b"
Alternate Message
N/A
Message Type
CHECK
Description
This is the output message from SGS Breakline Detection feature. A levee or embankment has been detected during the SGS pre-processing.
Suggestions
Consider adding breakline to prevent water from "leaking" through the cells.
| Up |
|---|
 3xxx Messages
|