Difference between revisions of "TUFLOW Message 3999"

From Tuflow
Jump to navigation Jump to search
Line 8: Line 8:
 
|type=[[ERROR]]  
 
|type=[[ERROR]]  
 
|message_desc=This error usually indicates an invalid model option has been passed to HPC solver unnoticed during the model pre-processing.  
 
|message_desc=This error usually indicates an invalid model option has been passed to HPC solver unnoticed during the model pre-processing.  
|suggestions=In some circumstances, the description in the error message may allow you to guess which model setting is causing the problem and you might succeed in getting the model running by using a correct setting. Otherwise, please contact [mailto:support@tuflow.com support@tuflow.com] with accompanying .tlf and .hpc.tlf log files if you receive this error massage.
+
|suggestions=In some circumstances, the description in the error message may allow you to guess which model setting is causing the problem and you might succeed in getting the model running by using a correct setting. Otherwise, please contact <u>[mailto:support@tuflow.com support@tuflow.com]</u> with accompanying .tlf and .hpc.tlf log files if you receive this error massage.
 
|discussion_page=* [[Talk:TUFLOW Message 3999|Discuss Message 3999]]
 
|discussion_page=* [[Talk:TUFLOW Message 3999|Discuss Message 3999]]
 
|link3=''
 
|link3=''

Revision as of 11:05, 4 July 2022

TUFLOW Message
ERROR 3999: nDevices requested less than 1.

Alternate Message
ERROR 3999: unkown hardware option = 'a'.
ERROR 3999: Unknown units option 'a'.
etc

Message Type
ERROR

Description
This error usually indicates an invalid model option has been passed to HPC solver unnoticed during the model pre-processing.

Suggestions
In some circumstances, the description in the error message may allow you to guess which model setting is causing the problem and you might succeed in getting the model running by using a correct setting. Otherwise, please contact support@tuflow.com with accompanying .tlf and .hpc.tlf log files if you receive this error massage.


Up
Go-up.png 3xxx Messages