TUFLOW Viewer - Load Results
Revision as of 01:29, 23 February 2021 by Ellis Symons (talk | contribs) (Created page with "===Tool=== Loads TUFLOW Classic, TUFLOW HPC, and TUFLOW FV results. The tool will load in both map outputs and ESTRY timeseries results (if available). The following files are...")
Tool
Loads TUFLOW Classic, TUFLOW HPC, and TUFLOW FV results. The tool will load in both map outputs and ESTRY timeseries results (if available). The following files are accepted as inputs:
- *.tcf - TUFLOW Control File. The tool will deduce the output name and output folder from the TCF file. It will scan control files for scenario names, event names, and variables and will prompt user to select which scenarios(s) to load. The tool will load in all results that match the search criteria (the result name contains the TCF file name and selected scenario names). Selecting scenario names will narrow the results it loads e.g. if your TCF name is M01_5m_~s1~_001.tcf and you are running 3 events EXG, DEV1, DEV2 - the tool will load all results if no scenarios are selected. If one scenario is selected it will load just the selected scenario.
- *.tlf - TUFLOW Log File. TUFLOW Classic / HPC will save this file in the log folder (do not select the *.hpc.tlf if running TUFLOW HPC) and the result names are extracted directly from the log file. This method only supports loading *.xmdf map outputs (i.e. does not support *.dat). This is the preferred method of loading in map outputs and timeseries at the same time as there is no interpretation of what the output name is as there is with the prvious method.
- *.fvc - TUFLOW FV Control file.The tool will deduce the output name and output folder from the FVC file.