TUFLOW Viewer - Load Results - Particles

From Tuflow
Revision as of 01:28, 21 April 2021 by Ellis Symons (talk | contribs)
Jump to navigation Jump to search

Tool Description

Loads results from the TUFLOW particles module. The particles module outputs a NetCDF file with the suffix "_ptm" e.g. M03_5m_001_ptm.nc

Why Does Nothing Happen After Loading Results?

The particle results require the Python netCDF library (netCDF4) and this was not packaged with the QGIS install prior to QGIS 3.16. Therefore it is highly recommended to install at 3.16+ if attempting to load in results of the TUFLOW particle module.

OSGeo4W64

If using the OSGeo4W64 installer, you will be required to manually install the python3-netCDF4 library (regardless of QGIS version).
Particles osgeo netcdf.PNG

Examples

LoadResults Particles.gif

Links

Similar Tools

Back to TUFLOW Viewer Page