TUFLOW Viewer - Load Results - Particles
Revision as of 16:09, 18 May 2021 by Chris Huxley (talk | contribs)
Tool Description
Loads results from the TUFLOW particles module. The particles module outputs a NetCDF file with the suffix "_ptm" e.g. M03_5m_001_ptm.nc
Why Does Nothing Happen After Loading Results?
The particle results require the Python netCDF library (netCDF4) and this was not packaged with the QGIS install prior to QGIS 3.16. Therefore it is highly recommended to install at 3.16+ if attempting to load in results of the TUFLOW particle module.
OSGeo4W64
If using the OSGeo4W64 installer, you will be required to manually install the python3-netCDF4 library (regardless of QGIS version).
Examples
