Tute M01 Zpt Check Arc Archive

From Tuflow
Revision as of 13:26, 5 April 2024 by Emilie Nielsen (talk | contribs) (→‎Conclusion)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

ArcMap will be used to import the check files and view the final elevations in the 2D model.

Method

With the Write Check Files command specified, TUFLOW will output the elevations in the model in two formats. The elevations at the 9 points around the cell are contained in a point layer, this file is named M01_5m_002_zpt_check_P.shp and is located in the TUFLOW\check\2d\ folder. This file contains the exact elevations in the model. As this point vector layer contains thousands of points and is not easy to visualise TUFLOW also outputs a raster (gridded) dataset in the .flt format. The raster dataset can be viewed easily in most GIS packages including ArcMap.
Note: The DEM_Z file is a north-south aligned raster layer. Our model is rotated. The raster data has been interpolated from the model dat, and as such does not contain the exact elevation. It is however, much easier to visualise and is extremely useful nonetheless

  1. Load the M01_5m_002_DEM_Z.flt file from the TUFLOW\check\2d\ folder. This can be dragged and dropped into ArcMap from Windows Explorer or loaded from the Catalog Window. To do this, open the Catalog Window, navigate to the TUFLOW\check\2d folder and drag this into the layer control as per the image below.
  2. Tute M01 Arc DEM Z.jpg
  3. The style / colour can be changed by double clicking on the layer in the layer control and changing the style.
  4. Tute M01 Arc DEM Z02.jpg

    Tute M01 Arc DEM Z03.jpg

Conclusion

If the elevations in ArcMap file look like the image above, the DEM or TIN input has been successful! The same approach can be used to visualise the spatial distribution of land-use (materials) by loading the M01_5m_002_DEM_M.flt layer.

Return to the Tutorial Module 1 where we will view the TUFLOW results.