Tutorial M03 Results QGIS

From Tuflow
Revision as of 09:08, 15 August 2023 by Emilie Nielsen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

QGIS is used to view the 1D time series results with the TUFLOW Viewer. For viewing of the 2D map results, see Module 1.

Method

Plot Time Series results through the culverts:

  1. Open the TUFLOW viewer.
  2. Select File > Load Results. Navigate to the M03_5m_001.tcf in the Module_03\TUFLOW\runs folder and open it.
  3. When prompted to 'Open Result GIS Layer', click 'Yes'. This loads in all of the 1D and 2D results.
  4. Two additional files appear in the Layers panel:
    • M03_5m_001_PLOT_L
    • M03_5m_001_PLOT_P
  5. Select the M03_5m_001_PLOT_L file in the Layers panel and using the 'Select Features' tool highlight one of the 1d_nwk lines.
  6. Select one of the Time Series datasets shown with the Results 2.png icon and the 'Time Series' tab gets updated.



Plot longitudinal profiles from the Time Series output:

  1. The available long profile result types have a long profile icon Results lp v2.png and display in the 'Cross Section / Long Profile' tab.



Conclusion

  • The 1D results were assessed including time series and long profile results.
  • For further functionality, see TUFLOW Viewer.


Up
Go-up.png Back to Module 3 Main Page