Difference between revisions of "Tutorial M06 002 Results QGIS"

From Tuflow
Jump to navigation Jump to search
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
= Introduction =
+
=Introduction=
−
QGIS is used to create, import and view input data.<br>
+
QGIS is used to view the cumulative rainfall, rainfall rate and material rainfall losses with the TUFLOW Viewer. For viewing of the 2D map results, see <u>[[Tutorial_M01_Results_QGIS | Module 1]]</u>.<br>
 
<br>
 
<br>
  
−
= Method =
+
=Method=
−
Create a 2d_rf layer with digitised polygons based on the input rainfall hyetographs:
+
Inspect cumulative rainfall, rainfall rate and loss outputs:
 
<ol>
 
<ol>
−
<li>Click on the ‘Import Empty File’ tool from the TUFLOW Plugin toolbar.
+
<li>Open the TUFLOW Viewer.
−
<li>Select '2d_rf' from the Empty Type list.
+
<li>Select File > Load Results. Navigate to the '''M06_5m_002.tcf''' in the '''Module_06\TUFLOW\runs''' folder and open it.
−
<li>In the Run ID box write: 'M06_polygons_002'.
+
<li>One additional output type appears in the Result Type panel:
−
<li>Tick the 'Regions' Geometry Type and hit 'OK'. The 2d_rf appears in the QGIS Layers panel.<br>
+
:*Cum. Mat. Loss: the total rainfall losses applied as initial and continuing losses specified in the materials file.  
−
</ol>
+
<li>Use the Plot Time Series tool to see the cumulative material loss time series. Notice the variation due to the assigned materials ID:<br>
−
The same catchment breakup is used as the 2d_sa layer:
 
−
<ol><li>Navigate to the '''Module_06\TUFLOW\model\gis''' folder and open the '''2d_sa_M01_001_R.shp''' layer in QGIS.  
 
−
<li>Copy and paste the polygons from the 2d_sa layer into the 2d_rf: <br>
 
 
<br>
 
<br>
−
[[File:Animation M06 GIS 002 01a.gif]]<br>
+
{{Video|name=Animation_M06_Results_002_01b.mp4|width=1262}}<br>
 
<br>
 
<br>
−
<li>Open the attribute table and make the following edits:
+
<li>Use the Plot Time Series tool to see the time series of the cumulative rainfall, rainfall rate and losses at a point. Notice the results vary spatially due to the 2d_rf polygons and 2d_mat regions: <br>
−
:*Update names to match the names in the '''rainfall_station.csv''' input data (RF_FC04, RF_FC05, RF_FC06, RF_FC07)
 
−
:*f1: 1
 
−
:*f2: 1 <br>
 
−
The attributes f1 and f2 are multipliers adjusting the rainfall spatially. No adjustments are made, a value of 1, e.g. 100% of specified rainfall is used. <br>
 
−
<li>Turn off editing to save the edits.<br>
 
 
<br>
 
<br>
−
[[File:Animation M06 GIS 002 02a.gif]]<br>
+
{{Video|name=Animation_M06_Results_002_02b.mp4|width=1262}}<br>
 +
<br><br>
 
</ol>
 
</ol>
−
<br>
 
  
 
=Conclusion=
 
=Conclusion=
−
:*Polygons have been digitised based on input rainfall hyetographs.
+
:*The cumulative rainfall, rainfall rate and rainfall material losses derived from rainfall polygons were inspected with the TUFLOW Viewer.
 +
:*For further functionality, see <u>[[TUFLOW_Viewer | TUFLOW Viewer]]</u>.<br>
 +
<br>
  
−
<br>
 
 
{{Tips Navigation
 
{{Tips Navigation
−
|uplink=[[Tutorial_M06#Results_02| Back to Module 6 Main Page]]
+
|uplink=[[Tutorial_M06#Results_2| Back to Module 6 Main Page]]
 
}}
 
}}

Latest revision as of 09:30, 15 August 2023

Introduction

QGIS is used to view the cumulative rainfall, rainfall rate and material rainfall losses with the TUFLOW Viewer. For viewing of the 2D map results, see Module 1.

Method

Inspect cumulative rainfall, rainfall rate and loss outputs:

  1. Open the TUFLOW Viewer.
  2. Select File > Load Results. Navigate to the M06_5m_002.tcf in the Module_06\TUFLOW\runs folder and open it.
  3. One additional output type appears in the Result Type panel:
    • Cum. Mat. Loss: the total rainfall losses applied as initial and continuing losses specified in the materials file.
  4. Use the Plot Time Series tool to see the cumulative material loss time series. Notice the variation due to the assigned materials ID:



  5. Use the Plot Time Series tool to see the time series of the cumulative rainfall, rainfall rate and losses at a point. Notice the results vary spatially due to the 2d_rf polygons and 2d_mat regions:




Conclusion

  • The cumulative rainfall, rainfall rate and rainfall material losses derived from rainfall polygons were inspected with the TUFLOW Viewer.
  • For further functionality, see TUFLOW Viewer.


Up
Go-up.png Back to Module 6 Main Page
Retrieved from "https://wiki.tuflow.com/w/index.php?title=Tutorial_M06_002_Results_QGIS&oldid=34397"