Tutorial M06 002 Results QGIS

From Tuflow
Revision as of 02:44, 10 May 2022 by ElizaCollison (talk | contribs) (Created page with "= Introduction = QGIS is used to create, import and view input data.<br> <br> = Method = Create a 2d_rf layer with digitised polygons based on the input rainfall hyetographs:...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

QGIS is used to create, import and view input data.

Method

Create a 2d_rf layer with digitised polygons based on the input rainfall hyetographs:

  1. Click on the ‘Import Empty File’ tool from the TUFLOW Plugin toolbar.
  2. Select '2d_rf' from the Empty Type list.
  3. In the Run ID box write: 'M06_polygons_002'.
  4. Tick the 'Regions' Geometry Type and hit 'OK'. The 2d_rf appears in the QGIS Layers panel.

The same catchment breakup is used as the 2d_sa layer:

  1. Navigate to the Module_06\TUFLOW\model\gis folder and open the 2d_sa_M01_001_R.shp layer in QGIS.
  2. Copy and paste the polygons from the 2d_sa layer into the 2d_rf:

    Animation M06 GIS 002 01a.gif

  3. Open the attribute table and make the following edits:
    • Update names to match the names in the rainfall_station.csv input data (RF_FC04, RF_FC05, RF_FC06, RF_FC07)
    • f1: 1
    • f2: 1
    The attributes f1 and f2 are multipliers adjusting the rainfall spatially. No adjustments are made, a value of 1, e.g. 100% of specified rainfall is used.
  4. Turn off editing to save the edits.

    Animation M06 GIS 002 02a.gif


Conclusion

  • Polygons have been digitised based on input rainfall hyetographs.


Up
Go-up.png Back to Module 6 Main Page